toolkit ( including: test pencil, socket head wrench, screwdriver ( straight ), screwdriver ( crosshead ), monkey wrench )
oil-seal & sealing ring
- Hydraulic oil temperature detection
- Four corner pull ring
- Carriage centralized lubrication
- Hydraulic oil temperature monitoring, computer can display the value
- Hydraulic oil level detection
Number of fast water transport interface
Manipulator interface, Euro 12 or 64
( Three-color alarm light )
1. Front door mechanical protection
2. Front door electronic protection
3. Front door hydraulic protection
4. Backdoor protection project
Attention for Appearance of Machine
Sheet metal color and design
- Which kind of LOGO
- Which machine nameplate
- Which sign of machine model
Attention for Power System:
- Oil pump and motor
- Hydraulic motor (or oil motor, sol motor)
( hydraulic motor )
( motor )
Attention for Electric Box:
- Solid state relay
- The temperature access points of the controller, 9118 and 9110 have different number of access points
- Whether the voltage is 380V, 220V in some countries
- If the power regulator is needed
( solid state relay )
( power regulator )
1.The color and the height of frame
2. Whether the hopper is needed
( hopper )
The controller program needs to be updated accordingly
1. Whether the length of the material tube group is the same as the original one from factory, otherwise the foot of the carriage needs to be adjusted.
In the case of shortening the material tube group:
- Move the carriage and its feet forward, or add the carriage feet in front (two sets). After moving forward, the carriage rods and other supporting equipment need to be reconfigured.
- Increase the length of the nozzle and the barrel flange with the prerequisite of not affecting the product molding. If you increase the length of the nozzle, you need to consider the new nozzle heating
2. For the size of the heating winding and the installation of the thermocouple, you need to check the models of the heating winding personally, because there are many errors in the warehouse delivery.
- A screw, small diameter, increased pressure, low plasticizing speed
- C screw, large diameter, reduced pressure, high plasticizing speed
Features of Special screw barrel:
- Wear-resistant bimetallic screw, bimetallic barrel
- Electroplating screw-PC, etc. for materials with high viscosity
Required for large machine
When increasing the amount of blowing, you need to ensure that the controller program also increases accordingly.
When adding core pulling, you need to ensure that the controller program also increases accordingly.
- How to change the ejection cylinder
- How thimble is distributed
- The need to strengthen the thimble plate
- The mold opening stroke increases
- Add more corinth column to the thread
Write an email directly to info @ onexlimited. com with problems described clearly, and this email will go directly to the general manager.
- Receive orders from the Sales Department, arrange production, load goods on time, declare to customs for export, prepare documents for customers and process documents.
- Deal with after-sales issues, guide the use of products, deal with quality issues and quality complaints, including arrangements for sending engineers abroad.
- Collect feedback from customer regularly to improve the quality of work.
The main work of Sales Department
1. Expand markets and collect information
2. Confirm the orders with customers and transfer them to the After-sales Service Department
- change screen from “operator” to “system”, password is “182838”
- press F10 twice, it will show screen “I/O Input Definition”
- press F8 ,you will find “Clamp parameter”, then input password “123456”
- Move cursor to “Lubber Counter MAX”, then input parameter “300”
- press F9 to return the screen “system”, then press F10 one time, finally press F9 screen “Mold Adjust” to setting the auto lubrication modulus to “300” .
- change screen from “operator” to “system”, password “182838”
- press F10 twice, show screen “I/O Input Definition”
- press F8 , find the button “custom setting”, and input password “123456
- change cursor to “system date”, then input password“585858” to set the time.
- press F9 to return the screen “operator”
1.System pressure is adjusted to be greater than 15Mpa.
2.Measuring the parallelism with a dial indicator,
the deviation of the four corners as follows are ok.
Oil storage capacity: 2 kilos
1.Lubrication parameter setting under normal condition of use:
100 molds within 1 year
100-300 molds over 1 year
3.The lubrication oil must be new gear lubricant. Filling used oil is not allowed, to avoid serious mechanical damage.
4.Lubrication oil recommended: Mobil gear oil 629 or CASTORSP150.
5.Manual lubrication once a week. Confirm the lubrication oil pump operates normally (Normal operating pressure of lubrication pump is 15-17 kg).
Type Lubrication time（s）
1.Adjust tail platen to the end , it should be in the largest distance with the second platen ;
2.Lift the two tie bars to change the iron sheet and the hose
3. Three steps to fit
1）Fix the two screws as below
2) tensing iron sheet as hard as you can
3) fix the last two screws
1.Enter operator password “182838”,
2.Press F10 twice to enter the view “I/O Input Definition”
3.Press F8 to find “Mold Adjust”, then enter password “123456”
4.setting “Min- Limit” &”Max-Limit”
- Enter system password: “14321”, then press “F2”
- DA Select “#3”
- Adjust parameter of “D/A Press Curve” and “D/A Flow Curve” according to the machine.