Contact Us Today ! |info@onexlimited.com

For all

Home|For all

Injection Compression Molding Technology

By |2020-08-31T00:49:45+00:00August 31st, 2020|For all, plastic industry|

Injection compression molding (icm) is an advanced form of traditional injection molding. It can increase the injection length/wall thickness ratio of injection molded parts. And it can use smaller clamping force and injection pressure. Besides, it will reduce material internal stress and improve processing productivity. Injection compression molding is suitable for products made of various thermoplastic

The Operation of Injection Molding Machine

By |2020-08-28T00:49:12+00:00August 28th, 2020|For all, plastic industry|

About the Operation of Injection Molding Machine Before booting Check whether there is water or oil in the electrical control box. If the electrical appliance is damp, do not turn it on. Maintenance personnel should dry the electrical parts before turning it on. Check whether the power supply voltage is suitable, generally

The Damage and Maintenance Measures of Mold Products

By |2020-08-26T00:52:25+00:00August 26th, 2020|For all, plastic industry|

Test the properties of injection mold We should test the various properties of injection mold under the normal operation of the injection molding machine and mold. Then measure the size of the final molded plastic part. And deterine the current state of the mold with this information. Besides, we can also fina the

Practical Tips for Furniture Maintenance

By |2020-09-03T05:28:30+00:00August 25th, 2020|For all, furniture|

Practical Tips for Furniture Maintenance 1. Wooden furniture The furniture made of natural wood has a biggest advantage. That is the natural wood grain and the varied natural colors. Since natural wood is an organism that constantly breathes, it must be placed in an environment with suitable temperature and humidity. At the

How to Avoid the Floating Fiber on Plastic Parts?

By |2020-08-24T01:11:57+00:00August 24th, 2020|For all, plastic industry|

Why Adding Glass Fiber to the Plastic Parts ? Are you still worrying about the "floating fiber" on the surface? Plastic parts have many shortcomings in the using process. To make plastic parts more suitable for other fields (replace steel with plastic ) and change the properties of resin like wear resistance, heat resistance, strength, fire resistance, etc., it’s a

How to ensure the safety in the operating procedures of the injection molding machine?

By |2020-08-21T00:43:14+00:00August 21st, 2020|For all, plastic industry|

The operating procedures of the injection molding machine are as follows: (1) The operator must be familiar with and understand the function of each switch button on the equipment operation panel. And operate in strict accordance with the operating rules and attentions. (2) Before the machine heats up and starts production, open the cooling

Dining Chair and Table

By |2020-08-24T03:39:29+00:00August 20th, 2020|For all, furniture|

Dining Chair and Table E218 Dining Table Size:1640(1940)x1000x750mm    Packing:1pc/2ctns  CBM:0.254m3          G.W.:75kgs ✿ Design :   Frame: Sandy Black Powder Coating    TOP:super white tempered glass with marble painting T10MM F520L Dining Bench Size:1360x605x865mm                 

The Application of High Rate of Fire

By |2020-08-19T00:55:19+00:00August 19th, 2020|For all, plastic industry|

When filling the mold at low speed, the flow rate and the product size is relatively stable with small fluctuation. What’s more, the internal stress of the product is low, and the internal and external stress tends to be consistent. For example, a polycarbonate part is immersed in carbon tetrachloride, the product using the high-speed injection molding has a

Injection Mold Maintenance

By |2020-08-17T02:02:44+00:00August 17th, 2020|For all, plastic industry|

As the most important production tool of the injection molding factory, the injection mold determines the shape, specification, size, and appearance finish of the product. The material of the hardware mold is steel, which is generally composed of a front mold and rear mold. Due to the specificity, precision, vulnerability and other characteristics of

Top Sliding Bar

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.

Recent Tweets

Newsletter

Sign-up to get the latest news and update information. Don't worry, we won't send spam!

[contact-form-7 404 "Not Found"]