Contact Us Today ! |info@onexlimited.com

For all

Home|For all

Ⅱ. What problems should be paid attention to when producing PC products?

By |2020-06-01T00:49:27+00:00June 1st, 2020|For all, plastic industry|

This article will explain the issues about producing PC products in detail. And this is the Part Two which includes the following 5 aspects: Mold temperature Mold temperature control: 85 ~ 120 ℃, generally controlled at 80-100 ℃. For products with complex and thin shapes, and higher requirements, it

Ⅰ. What problems should be paid attention to when producing PC products?

By |2020-06-01T00:54:46+00:00May 29th, 2020|For all, plastic industry|

This article will explain the issues about producing PC products in detail and it is divided into 2 parts. This is the Part One which includes the following 5 aspects: Raw material drying PC plastics, even touching a bit of water, the situation of bonds broken for hydrolysis, lower molecular

How to solve the burnt injection parts?

By |2020-05-27T02:15:06+00:00May 27th, 2020|For all, plastic industry|

For some reasons, injection molds often get burnt during the production. With different  causes of the burnt injection parts like machinery, mold or molding conditions, the solutions adopted are also different.  1.  Machinery for example: For the overheating of barrel due to abnormal conditions, the resin is decomposed at high temperature, and is injected into

How to deal with the sudden failure of the injection molding machine ? You must be clear and logical!

By |2020-05-25T07:53:09+00:00May 25th, 2020|For all, plastic industry|

After reading this post, you will know some common characteristics and failures of injection molding machines and how to deal with and avoid them. Content 1. The common characteristics of injection molding machines   2. Procedures for quick and effective fault analysis and elimination Step 1 Perform symptom analysis while keeping

Ⅱ.Do you know the 30 common problems and solutions in the injection molding process?

By |2020-05-25T03:36:55+00:00May 20th, 2020|For all, plastic industry|

Part Two ( 16-30 ) What is the injection pressure of injection molding machine? Injection pressure P( kg / cm2 ) = [ л / 4 × ( D12-D22 ) × P × 2 ] / ( л / 4 × d2 ) What is the plasticizing capacity of injection molding machine? Plasticizing capacity W ( g / sec ) =

Cable Tie Sourcing Service in China

By |2020-05-25T03:31:30+00:00May 19th, 2020|For all, important information|

Why we may do the best service for you?  70% market share in China's Cable Tie Manufacture Machine. ( Injection Molding Machine Special for Nylon Cable Ties ) Teaching the manufacture how to produce the cable tie be into the cable tie manufacture field from 2005. Wide range of connection of the cable

Ⅰ.Do you know the 30 common problems and solutions in the injection molding process?

By |2020-05-25T03:36:57+00:00May 18th, 2020|For all, plastic industry|

PART ONE ( 1-15 ) The product runs off the edge (flash edge)when being turned on. The reason and solution of the product lacking glue after a period of production. When the machine starts to work, the melt glue in the material tube of the injection molding machine has a long heated time,

The pollution of hydraulic system of injection molding machine and relevent maintenance plan

By |2020-05-25T03:30:40+00:00May 15th, 2020|For all, plastic industry|

Do you know the pollution of hydrauli system of injection molding machine? How to deal with it? The decisive factors for the quality of the hydraulic system of injection molding machine: Rationality of the system design Performance of the system components Maintenance and solutions for the pollution of the system. The pollution

Tips on Travel to China During the Coronavirus Outbreak

By |2020-05-30T03:39:35+00:00May 13th, 2020|about business, For all, important information, important information for business|

( Updated: 2020.05.28 ) Content 1. The most important thing you need: Food,Food,Food   For a long time, long time, long time. No food supply, staying in the airport, waiting for the immigration process (Some people have waited for 12 hours). 2. Immigration process at airport and 14-day Isolation   (1) At

The impact of COVID-19 on China’s Foreign Trade

By |2020-05-25T03:25:31+00:00May 9th, 2020|about business, For all|

China's goods trade in the first 4 months of 2020 (USD denominated) Total value of imports and exports               1.3 trillion                              down 7.5% Exports                         

Top Sliding Bar

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.

Recent Tweets

Newsletter

Sign-up to get the latest news and update information. Don't worry, we won't send spam!

[contact-form-7 404 "Not Found"]